LIGHTED X RUNWAY CLOSURE MARKER
Diesel Generator, 5-Minute Set-up, LED Light Fixtures
Diesel Generator, 5-Minute Set-up, LED Light Fixtures
Diesel Generator, 5-Minute Set-up, LED Light Fixtures
The Lighted X Runway Closure Marker is a lighted visual aid for indicating to airplane pilots that an airport runway is closed. Designed and certified in accordance with ICAO and Transport Canada requirements, its flashing lights can be seen both day and night from miles away, clearly discernible as a giant “X” and distinguishable from other lighted visual devices used at airports, signifying that the runway is not open for landings. The Lighted X trailer is easy to transport, and can be deployed by one person in less than five minutes.
The “X” shape comprises nine lights on four independent arms and a mast. When deployed, the mast tilts upward to nearly vertical, and the “X” is centred at the top of the mast. For transport and storage, the mast tilts downward and the arms pivot together. The entire assembly lies flat when stowed, held in place by support brackets and lock-pins.
Each arm includes two high-efficiency LED light fixtures, with one additional light fixture located at the centre of the “X.” LEDs provide highly directional light distribution, resulting in high luminosity and low power consumption.
System power is provided by batteries, which are charged continuously by a diesel engine. The system can run continuously for more than a week without intervention or refuelling, and the batteries continue to power the lights if the engine shuts down.
A weather-resistant enclosure houses the power system and has two side doors for easy access. A hinged top panel provides greater access when maintenance is required. The side doors may be opened while the maintenance panel is raised. An optional secondary-containment system protects against fluid leaks, spills, and drips.
FEATURES & BENEFITS
Transport
Compact trailer is easy to maneuver
Torsion axle provides smooth ride and reduces stress on components
Cradles with locking pins hold display arms in place during transport
Setup
Heavy-duty hand-winch allows one person to easily raise and lower “X” assembly
Lock-pins hold the assembly in place during operation
Full deployment by one person takes less than five minutes
Operation
Fully enclosed steel equipment-bay protects controls, engine, and other components from the elements
Two gull-wing doors with handles and latches provide access to controls, fuel tank, engine, and electronics
Locking door handles protect equipment bay from unauthorized access
Control panel features elapsed hour meter, engine indicator lights, and brightness-selection switch
Manually activated high-power operating mode melts ice from lights
Lights
High-efficiency LED lights provide bright, highly directional light
Lights are instant-on and immediately at full intensity
Flashing front-facing lights are visible for miles, day or night, even in poor weather
Flashing rear-facing indicator lights allow operator to see the equipment is operating
Power system
Ultra-quiet industrial diesel engine, 3-cylinder and water-cooled
Energy-efficient operation results in extraordinarily long run times
Engine properly sized for low-wattage load of high-efficiency LED lights
Engine size prevents wet stacking, ensuring higher efficiency and no waste
Extra-large polypropylene fuel tank shows fuel-level at a glance, no need for fuel gauge
Fuel tank has wide filler neck for convenience
Automatic engine-shutdown system protects engine from damage due to low oil pressure and high coolant temperature
Batteries continue to power lights after engine fuel runs out
Maintenance
50,000-hour LED lifespan reduces maintenance by virtually eliminating the need for replacement
Hinged maintenance panel provides unimpeded access to engine, generator and electrical components
Durable powder-coat finish resists the elements
Standard trailer tires
Heavy-duty bolt-on steel fenders can be replaced if damaged
Applications
Lighted visual indication of temporary closure of airport runway
Can also be used for airport taxiways
SPECIFICATIONS
Temperature Limits (Operating)
0 to 140°F (–18 to 60°C) on engine power
–40 to 140°F (–40 to 60°C) on shore power
Inquire about additional cold-weather options
Temperature Limits (Storage)
–40 to 185°F (–40 to 85°C)
Humidity Limits
Conformal coating rated to 95% relative humidity
Wind Load
Exceeds FAA requirements for minimum wind speed
Run Time
With engine, approximately 168 hours continuous operation on one tank of fuel
On batteries only, after engine shutdown, up to 24 hours depending on battery condition
Standards
Certified for use at FAA-regulated airports in accordance with the following documents of the US Department of Transportation, Federal Aviation Administration:
FAA AC 150/5345-55A, “Specification for L-893, Lighted Visual Aid to Indicate Temporary Runway Closure”
FAA EB67D, “Light Sources Other Than Incandescent and Xenon For Airport and Obstruction Lighting Fixtures”
FAA AC 150/5345-53D, “Airport Lighting Equipment Certification Program”
FAA Addendum to AC 150/5345-53D